WL28e

Wacker Neuson Radlader WL28e mit Palettengabel im Einsatz

Standard Components

  • Battery (lithium-ion), 96 V, battery capacity (gross) 14.1 kWh
  • Battery charger On-board 3 kW, plug type 2, charger cable Schuko 230 V / 10 A
  • Drive hydraulics motor (ECE R085) 33.1 kW
  • Work hydraulics motor (ECE R085) 21.2 kW
  • Hydraulic articulated pendulum steering
  • Steering cylinder: 1
  • Operator's canopy with ROPS/FOPS-tested restraint system
  • Generous provision of space in all operator's cabs
  • Ergonomic, generous access
  • Adjustable steering column (inclination and height)
  • Fully damped comfort seat with safety belt, weight, back and height adjustment
  • LED lighting according to StVZO
  • LED working lights, 1 in front, 1 rear on operator's canopy
  • Axle: planetary axle PA940
  • Drive system: electric drive, energy recovery when decelerating, travel direction selectable using joystick, auto/eco mode
  • Battery: internal battery heater, charging time 20% to 80% SOC 2.9 hr, charge release switch
  • Speed: 15 km/h (optional 20 / 25)
  • Travel speeds: 2
  • Operating brake:&# 160;multi-disc brake on front axle acting on front axle acting on rear axle via universal joint shaft
  • Parking brake: electric parking brake with hill-hold function (when stopping on a hill, the electric motor holds the machine in place)
  • 12-16.5 EM ET0 (12-16.5 BKT SkidPower ET 0)
  • Loading swing arm lifting height 2560 mm
  • Quick change device (Wacker Neuson HV/HT - C ) hydraulic
  • Kinematics: P
  • Lifting cylinder 2
  • Tipping cylinder 1
  • Floating position for lift and tipping cylinders
  • Mechanically pilot controlled joystick with direction switch
  • 3rd Front control circuit via lever with single detent for continuous function
  • EquipCare 36 months (incl. App & Manager)

Options

  • Operator's canopy with ROPS/FOPS-tested fold-down eps
  • 2-piece cabin doors incl. heated windshields to front and rear
  • Front and rear windshield incl. windshield wipers to front and rear (for standard operator's canopy)
  • Artificial leather seat; air cushioned (MSG 93)
  • Artificial leather seat; air cushioned; heated seat (MSG 93)
  • Fabric seat (standard with cabin) (MSG 83)
  • Fabric seat; air cushioned (MSG 93)
  • Fabric seat; air cushioned; heated seat (MSG 93)
  • Roof heating panel
  • Radio FM-ready (aerial, speaker)
  • Radio DAB+-ready (aerial, speaker)
  • Radio DAB+ complete
  • Sun shade
  • Protection headlights
  • Work lights LED performance (2000 lm) on the roof, 2 front, 2 rear
  • Rotating beacon set-up
  • Rotating beacon LED (yellow)&# 160;National regulations must be observed!
  • Rotating beacon (yellow) with magnetic base, National regulations must be observed!
  • Individual operating permit < 25 km/h
  • Number plate mounting front and rear
  • Triangular warning sign
  • Manual throttle

Axles

  • Planetary axle PA940, electric all-wheel drive with lock,  transfer case, universal joint shaft, differential lock 100%

Travel speed

  • 20 km/h (Speed increase)
  • 25 km/h (Speed increase)
  • 31x15.50-15 EM ET0 (EM tread, width 1,345 mm, height 2,351 mm) 
  • 31x15.50-15 EM ET-37 (EM tread, width 1,419 mm, height 2,351 mm)
  • 425/40-17 ET0 PR14 Delcora GSP+ (EM tread, width 1,370 mm, height 2,355 mm)
  • 31x15.50-15 AS ET0 Starco (AS tread, width 1,325 mm, height 2,346&# 160;mm)
  • 31x15.50-15 AS ET-37 Starco (AS tread, width 1,399 mm, height 2,346&# 160;mm)
  • 31x15.5-15 BKT TracMaster ET0 (AS tread, width 1,399 mm, height 2,346&# 160;mm)
  • 10-16.5 Sure Trax ET40 BKT (Sure Trax tread, width 1,128 mm, height 2,349 mm)
  • 12-16.5 Sure Trax ET45 BKT (Sure Trax tread, width 1,175 mm, height 2,349 mm)
  • 315/55R16 Conti MPT81 ET-30 (MPT tread, width 1,305 mm, height 2,331 mm)

 

  • Lowering brake valve (hose burst valves for lift and tipping cylinders)&# 160; incl. Floating position
  • Load arm damping

Quick change plates

  • SkidSteer (hydraulic - SAEJ2513 SSL HV)
  • SMS HV (hydraulic)
  • Kramer HV / WL - C (hydraulic)
  • Oil volume adjustment of 3rd control circuit
  • Additional hydraulic oil cooler
  • Panolin HLP Synt46 (Biohydraulic oil)
  • Hydraulic oil - pre-warming
  • 3rd control circuit proportional incl. continuous function via switch, pressure release 3rd control circuit front on the charging system, oil volume adjustment (operation: Via scroll wheel in front on the joystick)
  • Pressureless return line in front (1 x Flatface size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)
  • Quick coupling Faster 2-fold - machine side
  • Quick coupling Faster 2-fold - machine side + attachment side
  • One rear hydraulic connection double-acting via change-over valve (two couplings SVK size 3), 3rd control circuit in front or rear, (operation: Via switch (0 - 1) + 3rd control circuit).
  • Pressureless return line in rear (1 x SVK size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)
  • Lithium-ion battery 18.0 kWh 96V
  • Lithium-ion battery 28.0 kWh 96V
  • On-board battery charger up to 6 kW (AC)

Charger connection cable type 2 on the machine (multiple options available)

  • Protective contact mains plug (SchuKo) 230V/16A (is pre-selected), Can opt out of this if no charging cable or a different charging cable is required.
  • CEE, 3-pole, 230V/16A (blue)
  • CEE, 5-pole, 400V/16A (red)
  • Type 2 (IEC 62196)
  • Adapter set EU (Schuko, CEE 3-pole, CEE 5-pole)

Battery charge release

  • Lockable charge enabling

front

  • Front socket 13-pole (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Pressing function, 2nd Latching function
  • Front socket 13-pole (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Latching function, 2nd Momentary function
  • Front socket 13-pole (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Pressing function, 2nd Momentary function
  • Front socket 13-pole (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Latching function, 2nd Latching function

Rear

  • Rear socket 3-pole, (2x electrical functions E3/ E4, can be switched to front), operation: Via switch; 1st Latching function, 2nd Latching function
  • Outlet in rear, 7-pole for lighting rear attachments

Product Inquiry

* Mandatory fields