EW65

EW65 mobile excavator excavating a pipe trench in the filed

Wheeled Excavator EW65: power and speed

With a Wacker Neuson EW65 wheeled excavator, an operator can easily jump in the cab and head to the job site. The machine's road travel mode helps reduce time- and cost-intensive transport, while the variable drive system has a low rate of fuel consumption. With just one pedal to operate, the EW65 drives almost like a car. But it's a highly capable excavator, too.  The powerful load-sensing hydraulic system (LUDV) ensures the same speed for several boom movements with different loads. With proportional control auxiliary hydraulics and a triple boom, the EW65 offers smooth work with attachments and an excellent digging range.

Wheeled Excavator EW65

3-point kinematics

  • With 3-point kinematics, the conventional bucket linkage has been taken to a new level. This "3-bolt" design extends the bucket's angle of rotation to 200 degrees - 10% more than conventional bucket linkage. This increases the vertical dig depth as well as the digging forces. This eliminates the need to reposition the excavator as often, significantly increasing efficiency.
Wheeled Excavator EW65

Intuitive operating concept

  • The intuitive operating concept enables simple and comprehensive control of the excavator. The machine is operated using a joystick, jog dial and keypad. This makes accessing attachment and oil level settings for the additional control circuits quick and easy.
EW65 mobile excavator excavating a pipe trench in the filed

Optimal positioning of hydraulic components

  • Short hose paths result in lower power loss in the hydraulic system. This increases the service life of the hydraulic hoses, due to fewer wear points, especially in confined areas.
  • The clearly defined routing of the hydraulic hoses ensures maximum efficiency, by reducing line resistance.
Wheeled Excavator EW65

Powerful drive system with LUDV

  • The powerful drive system combines with a load-sensing hydraulic system (LUDV) to deliver quick working cycles, greater application flexibility, and easier control for comfortable and fatigue-free operation of the excavator. No matter what the load to be moved, the control movements on the joystick stay the same. Along with increased operating comfort, this results in a performance plus, while simultaneously reducing fuel consumption.
Studio photo EW65 with support pads photographed from the side

Triple boom

  • The articulated or "triple" boom provides greater maneuverability and, therefore, greater freedom of motion. The additional joint permits the bucket to be pulled right up to the travel gear or the dozer blade. Ideal when narrow spaces need to be accessed or an obstacle has to be moved out of the way. The excavator also features a greater dump height and even greater digging depth.

More Features

Wheeled Excavator EW65

2 operating modes, ECO/POWER

  • The two preset operating modes ECO and POWER differ from each other in engine speed and pump power. They allow easy adjustment of the excavator to the activity to be performed in order to work in the optimal fuel consumption range. In ECO mode, the focus is on economy, while in POWER mode, the focus is on work performance.
Wheeled Excavator EW65

Elaborately equipped comfort cab

  • The ergonomically optimized operator's cab ensures maximum operating comfort. In addition, an offset arm position, various windshield positions, a sunshade and a large skylight provide optimal visibility. Numerous other equipment options, such as heated seats, automatic air conditioning, a rearview camera with 7-inch display and an air-cushioned operator's seat help to make the workplace even more comfortable.
  • The height and tilt of the steering wheel can be adjusted and can thus be adapted to any operator individually and quickly.
Studio photo EW65 with outriggers from the side, photographed from behind

Individual support versions

  • Stable footing is essential, especially during heavy excavation work or in difficult ground conditions. For support, operators can use a dozer blade or support stabilizers – in front, the rear, or in any combination.
Wheeled Excavator EW65

LED work lights

  • Optimum illumination enhances safety around the work area and provides a higher utilization of the machine at night or in poor lighting conditions. The LED technology also offers longer service life of the fixtures
Mobile excavator EW65

Low overall height

  • The intelligent component arrangement inside the machine reduces its external dimensions, which makes it  an ideal choice for tight construction site conditions and low clearance heights. It also eases transport, as well as getting in and out of the excavator safer and less complicated. The low center of gravity provides excellent stability.
Wheeled Excavator EW65

Closed driving circuit

  • The closed driving circuit provides simple operation with just one drive pedal and allows for infinitely variable speed from 0 to 30 km/h/18.6 mph without the need to change gears.
Wheeled Excavator EW65

Powerful automatic climate control

  • The automatic climate control system provides consistent cooling. The air-conditioning system and fan operate until the set temperature is reached.  The system then switches off and starts up again, as soon as the interior sensors measure the deviation from the set temperature.
Wheeled Excavator EW65

Low noise emission

  • The quiet engine allows for easy communication on the job site and reduces stress for the operator
Wheeled Excavator EW65

Heated seat

  • When temperatures outside are low, the heated seat creates a comfortable working environment for the operator. In addition, the air-cushioned seat ensures increased driving comfort.
Wheeled Excavator EW65

Road speed

  • Quickly move between construction sites with speeds up to 30 km/h/18.6 mph. A wheeled excavator reduces the need for additional transportation when traveling from work area to work area.
Wheeled Excavator EW65

7-inch display and rear-view camera

  • The large, multi-functional 7-inch color display ensures a perfect overview of all the machine's functions, as well as the respective camera images.  The rearview camera enables safer reversing of the excavator. In addition, the view of the machine is better when it is rotated.
Wheeled Excavator EW65

Innovative windshield system with rain cover function

  • The windshields can be adjusted to any condition on the construction site. Closed, they are water- and wind-proof. The upper front window can be pushed under the cab roof. The lower windshield facilitates communication with others on the job site and also serves as a splash guard. In the second locking position, it can quickly be converted into a rain canopy. If necessary, both windows are pushed below the cab roof, where they are stored safely.
  • The two-part front window allows for optimal ventilation in the cab in any weather. In addition, it makes it easier to communicate with the operator. Removal and storage of the windshield is a thing of the past.
Wheeled Excavator EW65

Speed regulation system

  • The speed regulation system automatically maintains the speed of the machine where possible, provided it is activated. This way, the operator doesn’t have to concentrate on his speed and can enjoy the comfort of automation.
  • Ideal for municipal work such as mowing, milling and mulching.
EW65 mobile excavator excavating a pipe trench in the filed

Numerous attachments

  • Thanks to the optional additional control circuits, the excavator can be equipped with a wide range of attachments. This allows you to increase your application options and thus the utilization of the machine in no time at all.
Wheeled Excavator EW65

Easy service and maintenance access

  • Easy service, thanks to wide-opening engine hood, allows easy access to all parts.
  • No disassembly of heavy parts necessary, additional easily replaceable wear parts.
  • Quick and unrestricted access. Hydraulic and engine oil filters, air filter, water separator and also the tank filler neck are ideally accessible. Low service costs.
Wheeled Excavator EW65

Thermal resistance

  • The excavator can work under full load up to an ambient temperature of 45°C/113°F. The stable temperature level results in a longer service life for the hydraulic components and increases productivity.
  • Lower temperature level - longer life, work without loss of performance.

Product Inquiry

* Mandatory fields