• Yanmar 3 TNV 80 FT, 18.4 kW / 25 HP, EU: Stage V

• Hydrostatic all-wheel steering with end position synchronization
• Steering angle max. 2x38°
• Oscillating angle of the rear axle: ± 7°
• Steering cylinder: 2

• 10.0/75 - 15.3 AS

• Cab with heating and ventilation ROPS / FOPS tested with VSG safety window on the right side
• Front, roof, and rear wipers
• Heated rear window
• Tilt display
• Armrest with storage compartment
• Sun shade
• Bottle holder
• Storage net

• Comfort seat with safety belt

• Lighting equipment according to StVZO (road traffic licensing regulations)
• LED working lights, 1 in front, 1 on cab roof

• Axle: PAL1165 planetary steering axle
• Drive: hydrostatic via transfer case and universal joint shaft, electronically controlled
• Driving modes: Auto mode; ECO mode (reduction of engine speed when set speed is reached)
• Speed: 20 km/h
• Travel speeds: 2 | 7 km/h / 20 km/h (Optional 30)
• Operating brake: Hydraulically actuated disc brake on front axle acting on rear axle via universal joint shaft
• Parking brake: Electro-hydraulic spring-loaded brake on front axle, acting on rear axle via universal joint shaft incl. Auto-hold function

• Telescopic arm lifting height 4537 mm
• Quick change device (Wacker Neuson HV/TH - C) hydraulic
• Lifting cylinder 1
• Tipping cylinder 1

• New mechanically pilot-controlled joystick with direction switch
• 3rd Front control circuit via lever
• Connections Flatface size 2
• VLS (Vertical Lift System)
• Hydraulic oil cooler

• Reversing alarm (acoustic)

• Protective grating for windshield, removable
• Artificial leather seat; air cushioned
• Fabric seat; air cushioned
• Fabric seat; air cushioned; heated seat
• Air-conditioning system
• Radio-ready (antenna, speaker)
• Complete radio
• Power socket 2x USB
• Adjustable steering column (inclination and height)

• LED lighting according to StVZO
• Working lights LED (1000 lm) on the cab roof, 2 front, 1 rear
• Working lights LED (2000 lm) on the cab roof, 2 front, 1 rear
• Working lights LED (1000 lm) on telescopic arm, 1 front
• Working lights LED (2000 lm) on telescopic arm, 1 front
• Rotating beacon LED (yellow), (National regulations must be observed)!

• Individual operating permit > 25 km/h
• License bracket front and rear

• Diesel engine Yanmar 3TNV86, 33.3 kW / 45 HP (operation from -15°C - +45°C!)
• Manual throttle
• Engine pre-heating (coolant) + hydraulic oil pre-heating 230 V
• Reverse fan

Axles

• Axle PA1165, hydrostatic medium pressure all-wheel drive, (transfer case, universal joint shaft, differential lock 100%)

Driving mode

• Driving mode Auto / Eco / Attachments
• Driving mode Auto / Eco / M-Drive

Travel speed

• Speed limiter proportional (slow speed device)
• 30 km/h (Speed increase)

• Adjustment steering modes

• 31x15.50-15 AS ET0 Mitas
• 31x15.50-15 (400/50-15) AS ET0 Starco
• 270/65-16.5 KendaPowerGr ET-40
• 400/50-15 Starco Turf Tech ET0
• 270/65-16.5 KendaRockGr ET-40
• 315/55 R16 ET-20 Continental MPT81
• 260/70 R16.5 ET-60 Michelin BIBSTEEL Hard Surface

Quick Change Plates

• SkidSteer (hydraulic - SAEJ2513 SSL HV)
• SMS HV (hydraulic)
• Kramer HV/TH - C (hydraulic)

• Panolin HLP Synt46 (Biohydraulic oil)

• 3rd Control circuit via lever (two couplings Flatface size 2) incl.notch for control lever single
• 3rd Control circuit proportional incl. continuous function via switch, (Operation: Via scroll wheel in front on the joystick)
• High flow - power hydraulics single-acting (70 l/min.), (two couplings 1 x Flatface size 4A, male / 1x Flatface size 4A, female), (Operation: Via switch (0 - 1) + lever for 3rd control circuit).
• Pressureless return line in front (1 x Flatface size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug
• Quick coupling Faster 2-fold - machine side
• Quick coupling Faster 2-fold - machine side + attachment side
• Quick coupling Faster 2x 2-fold - machine side
• Quick coupling Faster 2x 2-fold - machine side + attachment side
• Reversing valve in front on 3rd control circuit (3rd Control circuit with 4 couplings Flatface size 2), (Operation: Selection via switch (0 - 1))
• Pressure release of 3rd Control circuit in front on telescopic arm

• Rear hydraulic connection double-acting via change-over valve (two couplings SVK size 3), (3rd Control circuit in front or rear; operation: Via switch (0 - 1) + 3rd control circuit).
• Rear hydraulic connection double-acting (two couplings SVK size 3) incl. separate control valve, (Operation: Via switch (1 - 0 - 2))

• Battery disconnect switch 2 circuits, (disconnection of the on-board power supply and the generator via 2 switching paths from the battery)

front

• Front plug receptacle, 13-pole (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Pressing function, 2nd Latching function
• Front plug receptacle, 13-pole (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Latching function, 2nd Momentary function
• Front plug receptacle, 13-pole (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Pressing function, 2nd Momentary function
• Front plug receptacle, 13-pole (2x electric functions E1/ E2 and lighting), (Operation: Via 2 buttons on the joystick; 1st Latching function, 2nd Latching function

Rear

• Rear plug receptacle, 3-pole (2x electric functions E3/ E4, switchable to front socket), (Operation: Via switch; 1st Latching function, 2nd Latching function
• Outlet in rear, 7-pole for lighting rear attachments